Bellwave CDMA BSM850 Communication Driver is the driver to communicate with BSM-800, BSM-850 CDMA modem of Bellwave in Korea.
<Figure 1> is read setting example of Bellwave CDMA BSM850 communication driver.
|
|
| <Figure 1> Read setting example of Bellwave CDMA BSM850 communication driver |
Device part of <Figure 1> input Com Port(COM1), Baud Rate(115200), Parity Bit(0), Data Bit(8), Stop Bit(1) respectively.
Bellwave CDMA BSM850 communication driver use 'STRING' memory.
Bellwave CDMA BSM850 communication driver’s read schedule
Bellwave CDMA BSM850 communication driver's read schedule input 'READ' one line.
When received SMS data, communication driver save readed data to 'STRING' memory '0' address.
Ex) Saving data : AT$SMSMT0<CR><CR><LF>ERROR<CR><LF> <-- don'r read SMS data.
You can send data to CDMA850 modem by using write commands.
Bit Write
Bit write and word write have the same setting parameters except output value(0 or 1).
Word Write
Word write setting parameters are as follows:
1) PORT Port no. (0 ~ 255)
2) STATION Don't care..
3) ADDRESS Don't care.
4) Extra1 Write command = ATZ, .... ( normal modem command )
5) Extra2 Don't care.
Write example 1)
PORT : 0 STATION : 1 ADDRESS : 0000 EXTRA1 : ATZ EXTRA2 : 0
The setting parameter shown above is an example of write for modem initialize of Bellwave CDMA BSM850 equipment connected with 0 port.
<Figure 2> is an appearance of Bellwave CDMA BSM850.
If you want more information, please connect to http://www.bellwave.com.
 |
| <Figure 2> Appearance of Bellwave CDMA BSM850 |